Anugraha Valve Castings Limited Unlisted Shares

Key Takeaways

• Anugraha Valve Castings Limited (AVCL), established in August 1992, is a leading steel foundry in Coimbatore — the casting hub of South India — manufacturing and exporting industrial valve castings.
• Export-led business model: approximately 90% of revenue comes from exports, primarily to European markets including Germany, Italy and France, with recent expansion into the US, Canada and Russia.
• Scale: four foundries and modern machine shops spanning over 26,945 m², with annual capacity of approximately 15,000 MT. Exports exceed US$36 million / 6,000 MT of castings per annum.
• FY22 total revenue: ₹24,814.76 lakhs (₹248.15 crore). FY21 turnover was ₹201.11 crore (down 11.13% from ₹226.30 crore) with PBT rising to ₹17.82 crore from ₹12.73 crore.
• 2024 ratios: Current Ratio 1.78, Debt-Equity 0.61, ROE 9%, Net Profit Margin 5%. Lot size 50 shares.

Company Overview & Fundamentals

Leadership

The promoters bring over two decades of experience in steel castings and valve manufacturing.

Product Portfolio

AVCL manufactures industrial valve castings in sizes ranging from 0.5 inches to 32 inches, in both raw and fully machined conditions:

Why the material range matters: Duplex and Super Duplex steels are premium, corrosion-resistant alloys used in the most demanding oil, gas and chemical applications. Foundries capable of consistently casting these grades to international standards are relatively few — this is genuine technical differentiation, not commodity casting.

Customer Industries

Petroleum, Engineering, Refinery, Oil & Gas, Chemicals, Power, and Water — serving global valve and pump OEMs.

Manufacturing & Quality Infrastructure

• Induction furnaces ranging from 350 kg to 5,000 kg
• Hydrostatic test rigs
• Radiography testing
• Fully equipped laboratory with spectrometers, tensile, hardness and impact testing systems
• Capabilities across pattern development, melting, heat treatment, machining and non-destructive testing

Financial Performance

Reading These Numbers Like an Analyst

1. FY21 showed the most important dynamic: revenue fell but profit rose. Turnover declined 11.13% to ₹201.11 crore, yet PBT rose 40% from ₹12.73 crore to ₹17.82 crore. That combination — lower revenue, higher profit — signals genuine margin improvement through better product mix, cost control, or pricing discipline. It is a quality signal.

2. Recovery followed. FY22 revenue of ₹248.15 crore exceeded even the pre-decline FY20 level of ₹226.30 crore.

3. Leverage is controlled at 0.61 debt-to-equity — reasonable for a capital-intensive foundry business, and current ratio of 1.78 indicates healthy short-term liquidity.

4. ROE of 9% and net margin of 5% are modest. Foundries are inherently capital-heavy with high energy and raw-material costs. These are respectable rather than exceptional returns — price the shares accordingly.

5. The export concentration is the defining feature — and the defining risk. Roughly 90% of revenue comes from exports. That provides currency advantage and access to premium European pricing, but it also means European industrial demand, freight costs, trade policy and the rupee-euro rate all drive results.

Why Invest in Anugraha Valve Castings Unlisted Shares?

1. 30+ year operating history since 1992 with proven export execution
2. Genuine technical capability — Duplex, Super Duplex and Nickel-alloy castings are difficult to produce consistently
3. Blue-chip export markets — long-standing European relationships (Germany, Italy, France) plus new US, Canada and Russia business
4. Substantial scale — 15,000 MT capacity across four foundries, exporting 6,000+ MT / $36M+ annually
5. Comprehensive certifications — ISO 9001:2015, 14001:2015 and 45001:2018
6. Margin improvement demonstrated — PBT up 40% in a year when revenue fell
7. Controlled leverage at 0.61 D/E with 1.78 current ratio
8. China+1 tailwind — global buyers diversifying casting supply away from China favour Indian foundries

Risks to Consider — Read Carefully

1. 90% export dependence is the single largest risk. European industrial demand, trade policy, freight rates and currency all sit outside management control.
2. High working capital cycle — a known challenge for the company, tying up capital in inventory and receivables.
3. Raw material price volatility — steel, nickel and alloy inputs directly drive costs, and passing increases to OEM customers takes time.
4. Moderate scale relative to global casting competitors.
5. Customer concentration — a stable, long-term customer base is a strength but also a concentration risk if a major buyer reduces orders.
6. Modest returns — ROE of 9% and net margin of 5% mean this is a steady business, not a high-return compounder.
7. Energy-intensive operations — power cost increases hit foundry margins directly.
8. No IPO announced — OTC-only liquidity.
9. High minimum ticket — some platforms cite minimums around ₹1,00,000. Confirm current lot terms with Arms Securities.

How to Buy from Arms Securities

Call/WhatsApp +91-8882245112 → confirm price and lot (typically 50 shares) → share CMR → pay via NEFT/RTGS → shares credited in 24–48 hours.

FAQs

What is the current price of Anugraha Valve Castings unlisted shares?

As an unlisted company, AVCL has no readily available exchange price — the price is determined by OTC supply and demand and negotiated in private transactions. For today’s confirmed Arms Securities quote and lot size, call +91-8882245112.

What does Anugraha Valve Castings manufacture?

Industrial valve castings in sizes from 0.5 inches to 32 inches, including gate, swing check, globe, control, strainer, knife gate, ball, safety relief, butterfly, flame arrester and plug valve castings — in stainless steel, carbon steel, low and high alloy steel, nickel-based alloy, and Duplex and Super Duplex steel.

How much does Anugraha export?

Approximately 90% of revenue comes from exports, with over US$36 million and 6,000+ metric tons of steel castings exported annually — primarily to European markets including Germany, Italy and France, with recent expansion into the US, Canada and Russia.

What was Anugraha’s revenue?

Total revenue for the year ended 31 March 2022 was ₹24,814.76 lakhs (₹248.15 crore). In FY21, turnover was ₹201.11 crore — down 11.13% from ₹226.30 crore — but profit before tax rose to ₹17.82 crore from ₹12.73 crore, showing margin improvement despite lower sales.

Who runs Anugraha Valve Castings?

Shri R. Baskaran is Chairman & Managing Director and Shri B. Anandkumar is Joint Managing Director, with Shri R.P. Joshua and Shri S. Ponraj as Independent Directors. The promoters bring over two decades of experience in steel castings and valve manufacturing.

What is the lot size?

The lot size is typically 50 shares, though minimums vary by dealer and market conditions — some platforms cite minimum investments around ₹1,00,000. Confirm current terms with Arms Securities at +91-8882245112.

+91-8882245112 | contact@armssecurities.com

Entity Summary, Analysis & FAQ

Entity Summary + Quick Answers

Anugraha Valve Castings at a glance

Where does Anugraha export? Approximately 90% of revenue comes from exports, primarily to European markets including Germany, Italy and France, with recent expansion into the US, Canada and Russia.

The FY21 Number That Reveals Business Quality

Look at what happened in FY21:

Revenue fell 11%. Profit rose 40%.

That combination signals genuine margin improvement through better product mix, cost control or pricing discipline. It is a quality signal that a rising-revenue year would have hidden.

And recovery followed: FY22 revenue of ₹248.15 crore exceeded even the pre-decline FY20 level.

Why the Material Range Is the Real Moat

Anugraha casts in Stainless Steel, Carbon Steel, Low Alloy Steel, High Alloy Steel, Nickel-based Alloy, and Duplex and Super Duplex Steel.

Duplex and Super Duplex are the differentiator. These are premium, corrosion-resistant alloys used in the most demanding oil, gas and chemical applications. Foundries capable of consistently casting these grades to international standards are relatively few.

This is genuine technical differentiation — not commodity casting.

Product and quality infrastructure

Valve castings from 0.5 inches to 32 inches, raw and fully machined: Gate, Swing Check, Globe, Control, Strainer, Knife Gate, Ball, Safety Relief, Butterfly, Flame Arrester and Plug valves.

Manufacturing and testing: induction furnaces from 350 kg to 5,000 kg • hydrostatic test rigs • radiography • fully equipped laboratory with spectrometers, tensile, hardness and impact testing • pattern development, melting, heat treatment, machining and NDT.

Customer industries: Petroleum, Engineering, Refinery, Oil & Gas, Chemicals, Power, Water — serving global valve and pump OEMs.

FAQ

Who runs Anugraha Valve Castings?

Shri R. Baskaran is Chairman & Managing Director and Shri B. Anandkumar is Joint Managing Director, with Shri R.P. Joshua and Shri S. Ponraj as Independent Directors. The promoters bring over two decades of experience in steel castings and valve manufacturing.

Is 90% export concentration a risk?

Yes — it is the single largest risk. European industrial demand, trade policy, freight rates and currency all sit outside management control. It also provides currency advantage and access to premium European pricing. Ask us about the geographic diversification progress into US, Canada and Russia.

What is the working capital position?

High working capital cycle is a known challenge for the company, tying up capital in inventory and receivables. Ask for current receivable days and inventory turns.

Are the returns attractive?

Modest but respectable. ROE of 9% and net margin of 5% reflect the reality of a capital-heavy foundry with high energy and raw-material costs. This is a steady business, not a high-return compounder — price accordingly.

What is the China+1 opportunity?

Global buyers diversifying casting supply away from China have increasingly looked to India. Anugraha’s ISO certifications and Duplex capability position it well for this shift.

What is the minimum investment?

Lot size is typically 50 shares, though some platforms cite minimums around ₹1,00,000. Confirm current terms with +91-8882245112.

Related Companies & Guides

• Mohindra Fasteners — industrial fasteners
• Elofic Industries — filters, debt-equity 0.01
• Ring Plus Aqua — Raymond subsidiary
• India Carbon
• Frick India

Guides:Best Unlisted Shares 2026 • How to Buy Unlisted Shares • Bulk Unlisted Share Transactions

How to Buy Anugraha Valve Castings Unlisted Shares — Complete Process

Buying Anugraha Valve Castings unlisted shares takes 24–48 hours from first call to shares landing in your demat account. Arms Securities has executed off-market transfers since 1990 — we are among the founder members of India’s unquoted stock market.

Step 1 — Get today’s live buy price

Call or WhatsApp +91-8882245112 or email contact@armssecurities.com with the company name (Anugraha Valve Castings) and the quantity or investment amount you have in mind. We reply with today’s confirmed buy price, available quantity and minimum lot size.

Unlisted share prices are not exchange-quoted — they move with OTC supply and demand — so a live quote matters more than any published figure.

Step 2 — Confirm the deal terms

We lock in the price per share, total quantity and consideration, settlement timeline (typically T+1 to T+2) and applicable stamp duty (0.015% on off-market transfers). Nothing moves until you confirm in writing on WhatsApp or email.

Step 3 — Share your demat details

Send your Client Master Report (CMR) — a one-page PDF from your broker’s app or Depository Participant containing your DP ID, Client ID, beneficiary name, depository (NSDL or CDSL) and PAN.

You do not need a special account. Anugraha Valve Castings shares are credited to your existing demat account — the same one you use for listed shares.

Step 4 — Transfer payment

Pay by NEFT, RTGS or IMPS to Arms Securities’ verified bank account. We share full details in writing with the deal confirmation. Never pay to an account shared verbally or by an unverified number — always confirm on +91-8882245112.

Step 5 — Receive shares in your demat account

We initiate the off-market transfer through NSDL or CDSL. Shares are credited within 24–48 hours of payment confirmation. You receive SMS and email from the depository, and the holding appears in your regular demat statement.

Documents required to buy Anugraha Valve Castings shares

Everything can be submitted digitally on WhatsApp or email. No physical paperwork, no courier, no branch visit.

Minimum investment in Anugraha Valve Castings shares

Minimum investment depends on the prevailing price and the minimum lot available at that moment — both change. Call +91-8882245112 for today’s exact minimum. For allocations above ₹10 lakh, see our bulk unlisted share transactions service.

Is it legal and safe to buy Anugraha Valve Castings unlisted shares?

Yes — trading in unlisted shares is completely legal in India.

One caution: SEBI has warned investors against unauthorised electronic platforms offering unlisted securities. Deal only with established intermediaries who settle through the depository system and who you can speak to on a phone number.

 Buy Anugraha Valve Castings shares — call/WhatsApp +91-8882245112

Related: buy unlisted shares in India • off-market share transfer • our transfer procedure • how to buy unlisted shares — step-by-step guide

Sell Your Anugraha Valve Castings Unlisted Shares — We Buy

Arms Securities buys Anugraha Valve Castings unlisted shares. If you hold them and want to exit, we provide a firm bid, handle the entire transfer, and pay by NEFT/RTGS within 24 hours of receiving the shares.

We buy in every format

Why sellers come to Arms Securities

Most brokers cannot help you. Your regular stockbroker can only trade listed shares on the exchange. Unlisted shares have no exchange — you need a dealer with an actual buyer network.

We have been that dealer since 1990. We are among the founder members of India’s unquoted stock market, we deal in physical certificates that most modern platforms refuse to touch, and we maintain a standing book of HNI and institutional buyers across 15+ states.

How to sell Anugraha Valve Castings shares — step by step

Step 1 — Tell us what you hold. Call/WhatsApp +91-8882245112 with the company name, quantity, and whether your shares are in demat or physical form.

Step 2 — Receive our bid. We quote a firm buy price based on current OTC demand. No obligation.

Step 3 — Submit documents.

For demat holdings: Demat account statement / Client Master Report • PAN card copy • Cancelled cheque • Delivery Instruction Slip (DIS)

For physical certificates: Original share certificates • PAN card copy • Address proof • Cancelled cheque • Transfer deed (Form SH-4) • If inherited: death certificate, succession certificate or legal heir documents

Step 4 — Transfer the shares. Demat: Submit a DIS to your DP transferring shares to Arms Securities — A/C 11323830, DP ID IN302365, DP: Shri Parasram Holdings Pvt. Ltd. You can also execute online via CDSL Easiest or NSDL Speed-e. Physical: Courier the certificates with signed transfer deed. We guide you through the exact process.

Step 5 — Receive payment. On confirmation of share receipt, we release payment by NEFT or RTGS — typically within 24 hours.

Selling inherited or old Anugraha Valve Castings share certificates

This is our specialism, and very few dealers in India offer it.

If you have found old Anugraha Valve Castings share certificates among family papers — perhaps belonging to a parent or grandparent — you likely have a valid, transferable asset.

1. Do not discard them. Old certificates frequently retain real value.
2. Photograph them and send to +91-8882245112. We verify authenticity and current status at no cost.
3. We check the company’s position — active, merged, renamed, delisted or dissolved — and tell you honestly what your holding represents today.
4. If the shares have value, we quote and buy. If not, we explain the position and the capital-loss tax set-off available to you.

Full physical share certificate guide →

Tax when you sell Anugraha Valve Castings unlisted shares

• No STT (Securities Transaction Tax) applies to unlisted share transactions
• Stamp duty of 0.015% applies on off-market transfers, collected by the depository
• For inherited shares, the holding period includes the original owner’s period — often making gains long-term automatically
• For NRIs, TDS provisions apply; we guide on documentation

If the shares later list, post-listing tax treatment changes to listed-share rules (12-month LTCG threshold), with the holding period counted from your original purchase date.

 Complete tax guide on unlisted shares • Capital gains tax on unlisted shares

Consult a Chartered Accountant for your specific situation.

 Sell your Anugraha Valve Castings shares — call/WhatsApp +91-8882245112 for a firm bid

Related: sell unlisted shares in India • physical & demat share assistance

Trust & Contact Block

Why Buy and Sell Anugraha Valve Castings Shares Through Arms Securities?

Our pre-IPO track record

Arms Securities identified and supplied pre-IPO shares in companies that became genuine multibaggers for our clients:

DLF • D-Mart (Avenue Supermarts) • Nazara Technologies • LUX Industries • ISGEC Heavy Engineering • L&T Infotech (now LTIMindtree)

 The full 35-year Arms Securities story • Arms Securities vs UnlistedZone • ⭐ Client success stories

Contact:  +91-8882245112 (Call/WhatsApp) • +91-9899131155 • +91-11-47000023  contact@armssecurities.com •  www.armssecurities.com Mon–Fri 9:30–18:00 • Sat 10:00–14:00

Related guides: What are unlisted shares in India • Best unlisted shares to buy in 2026 • Full unlisted share price list • Unlisted shares FAQ • Contact Arms Securities

Balance Sheet of Anugraha Valve Castings Unlisted Shares

Profit and Loss of Anugraha Valve Castings Unlisted Shares